SuperLube 100™ 21 bottles per box

$75.00
 

Packaging:

2-oz plastic bottles (easy storage & handling) / 21 bottles per box

Advantages:

  • Liquid mixes into solution much faster than it's inferior powdered counterparts
  • Reduces plugging problems versus other methods
  • No need for expensive ready-mixed priming grout
  • Increases ease and range of pump ability
  • Decreases wear on equipment
  • Easily introduced into pumping equipment
  • Decreases horsepower required for pumping
  • Reduces friction and line pressure
  • Packaged in easy-to-handle 2 ounce bottles

 

Directions:

Shake well before opening. Pour SuperLube 100 into 5-10 gallons of water and mix for at least 5 minutes. It is possible to mix the product directly in the hopper. When the water becomes thick, you may begin priming. It is recommended that testing be done to determine the suitability of SuperLube 100 to your concrete applications.

 

Application Principles:

SuperLube100 concrete admixture's water thickeners and lubricating agents effectively wet all of the concrete pumping equipment's surfaces it travels through the pipes and hoses. This process helps keep the concrete that then comes behind the SuperLube100 from losing water, and for the concrete to slide through the concrete pumping equipment's pipes and hoses more easily. The SuperLube100 liquid concrete pump primer and pumping aid can be mixed in a bucket or in the hopper, and contains no bentonite or any other type of clay. Also, since SuperLube100 is a liquid, it is already partially hydrated and can become a solution and develop thickness faster than powdered primers.

In addition, for priming horizontal concrete pumping lines it is recommended that you use a rubber ball in front of the priming solution to avoid wetting only the bottom of the line. For concrete containing superplasticizers, we recommend increasing the amount of water used to prepare the priming solution due to the low water content typically found in this type of concrete.

Concrete contractors and Ready-Mix contractors will save money, time, and extend the life of their equipment by adding SuperLube100 liquid concrete pump primer and pumping aid to your concrete mix and pump.

Our unique liquid pump primer and concrete admixture is conveniently packaged in 2-ounce plastic bottles which are easy to store and carry, so no more messes when powdered bags break open prematurely.

SuperLube100 liquid pump primer and concrete pumping aid is a top performer when it comes to reducing line pressure due to highly viscous and abrasive wet concrete. It enables the efficient placement of hard-to-pump concrete mixes and increases the range of concrete pump ability.

Read more
Current stock 10
Add to wishlist

Description

 

Packaging:

2-oz plastic bottles (easy storage & handling) / 21 bottles per box

Advantages:

  • Liquid mixes into solution much faster than it's inferior powdered counterparts
  • Reduces plugging problems versus other methods
  • No need for expensive ready-mixed priming grout
  • Increases ease and range of pump ability
  • Decreases wear on equipment
  • Easily introduced into pumping equipment
  • Decreases horsepower required for pumping
  • Reduces friction and line pressure
  • Packaged in easy-to-handle 2 ounce bottles

 

Directions:

Shake well before opening. Pour SuperLube 100 into 5-10 gallons of water and mix for at least 5 minutes. It is possible to mix the product directly in the hopper. When the water becomes thick, you may begin priming. It is recommended that testing be done to determine the suitability of SuperLube 100 to your concrete applications.

 

Application Principles:

SuperLube100 concrete admixture's water thickeners and lubricating agents effectively wet all of the concrete pumping equipment's surfaces it travels through the pipes and hoses. This process helps keep the concrete that then comes behind the SuperLube100 from losing water, and for the concrete to slide through the concrete pumping equipment's pipes and hoses more easily. The SuperLube100 liquid concrete pump primer and pumping aid can be mixed in a bucket or in the hopper, and contains no bentonite or any other type of clay. Also, since SuperLube100 is a liquid, it is already partially hydrated and can become a solution and develop thickness faster than powdered primers.

In addition, for priming horizontal concrete pumping lines it is recommended that you use a rubber ball in front of the priming solution to avoid wetting only the bottom of the line. For concrete containing superplasticizers, we recommend increasing the amount of water used to prepare the priming solution due to the low water content typically found in this type of concrete.

Concrete contractors and Ready-Mix contractors will save money, time, and extend the life of their equipment by adding SuperLube100 liquid concrete pump primer and pumping aid to your concrete mix and pump.

Our unique liquid pump primer and concrete admixture is conveniently packaged in 2-ounce plastic bottles which are easy to store and carry, so no more messes when powdered bags break open prematurely.

SuperLube100 liquid pump primer and concrete pumping aid is a top performer when it comes to reducing line pressure due to highly viscous and abrasive wet concrete. It enables the efficient placement of hard-to-pump concrete mixes and increases the range of concrete pump ability.

Reviews (0)

Be the first to write a review

Additional info

SKU: 095056439713